Call Us Today: 419-549-8200
Call Us Today: 419-549-8200
The Chive just might be the perfect little pocketknife
With its less-than-two-inch blade, the Chive is a small knife, which makes it perfect for pocket, pack, purse, or briefcase carry. But just because it's small doesn't mean the Chive isn't mighty. In fact, the Chive is perfect for just about any cutting task you'd care to ask it to do - from opening packages to breaking down cardboard boxes.
To ensure this handy little blade is always ready when you need it, the Chive is equipped with SpeedSafe assisted opening. Just pull back on the ambidextrous blade protrusion or push on the thumbstud and the blade moves out of the handle, ready for use.
The high-carbon blade steel offers good edge retention and excellent corrosion resistance. The bead-blasted finish is easy to maintain. For safety, the Chive has two locking systems. The frame lock secures the blade open so it can't accidentally close during use. And to ensure that it won't accidentally open during transport, the Chive is also equipped with a Tip-Lock slider to lock the blade closed when folded. In pure stainless steel, both blade and handle are easy to clean and maintain.
Technical Specifications
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Additional Features
| List | $99.99 |
Perfect in pink
With its less-than-two-inch blade, the pink Chive is a small knife. This, of course, makes it perfect for pocket, pack, purse, or briefcase carry. But just because it's small doesn't mean the Chive isn't mighty. In fact, the Chive is perfect for just about any cutting task you'd care to ask it to do - from opening packages to cutting duct tape.
To ensure this handy little blade is always ready when you need it, the pink Chive is equipped with SpeedSafe assisted opening. Just pull back on the ambidextrous blade protrusion or push on the thumbstud and the blade moves out of the handle, ready for use. The high-carbon blade steel offers good edge retention and excellent corrosion resistance. The bead-blasted finish is easy to maintain. This Chive's handle scales are pink anodized aluminum over steel liners. Anodizing not only enables the aluminum to take a scratch resistant color, but it actually strengthens the aluminum.
The pink Chive's handle is strong, lightweight, and colorful. For safety, it has a locking liner to keep it locked safely open and a Tip-Lock to keep it locked safely closed during transport. If pink is your color, the pink Scallion just might be your knife.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Additional Features
| List | $109.99 |
A right-sized pocketknife in classic black
With its 2 1/4-inch blade, the Scallion is a smaller knife, just perfect for pocket carry. But just because it's smaller doesn't mean the Scallion isn't mighty. In fact, the Scallion is perfect for just about any cutting task you'd care to ask it to do - from breaking down a cardboard box to cutting twine to cutting apple slices for lunch.
And to ensure your handy little blade is always ready when you need it, the Scallion is equipped with SpeedSafe assisted opening. Just pull back on the ambidextrous blade protrusion or push on the thumbstud and the blade moves out of the handle, ready for use. The high-carbon blade steel offers good edge retention and excellent corrosion resistance. The bead-blasted finish is easy to maintain.
For safety, the Scallion has two locking systems. The locking liner locks the blade open so it can't accidentally close during use. And to ensure that it won't accidentally open during transport, the Scallion is also equipped with a Tip-Lock slider to lock the blade closed when folded. In classic black, the Scallion's textured, glass-filled nylon handle scales are durable, lightweight, and easy to maintain.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Additional Features
| List | $89.99 |
A Scallion in pure stainless steel - and a frame lock
The Scallion is one of our most popular knives - and no wonder. With its 2 1/4-inch blade, the Scallion is the perfect size for lightweight and convenient pocket carry. But just because it's smaller doesn't mean it isn't mighty. From breaking down a cardboard box to cutting twine to opening packages, the Scallion is perfect for just about any cutting task you'd care to ask it to do.
One of the Scallion's cool features is SpeedSafe assisted opening. With SpeedSafe, you can open the blade one-handed. Just pull back on the ambidextrous blade protrusion or push on the thumbstud and the blade moves out of the handle, ready for use. The high-carbon blade steel offers good edge retention and excellent corrosion resistance. The bead-blasted finish makes it easy to maintain.
This Scallion's handle is pure stainless steel, which enables us to build-in a frame lock. When the blade is opened, a part of the handle, or frame, moves into place behind the blade, locking it open and ensuring that it can't accidentally close during use. The frame lock is an exceptionally strong blade lock. The second lock is the Tip-Lock. It's a slider that locks the tip of the blade inside the handle until you release it, which ensures the knife won't accidentally open during transport. A great all-stainless-steel look, blade security, and assisted opening…it all adds up to one great little knife.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Additional Features
| List | $109.99 |
NEW in blue!
One of our newest Scallions is wearing a coat of navy blue or—as some of us here at Kershaw call it, "shop coat blue." If you're looking to carry a pocketknife with a little color, but not too much, this new Scallion might be the one for you.
Apart from its new medium-blue handle scales, this Scallion shares features with the rest of the Scallion family. It has a compact, yet effective 2 1/4-inch blade, so it's the perfect size for pocket carry. The smaller blade takes on just about any task, but rates low on the intimidation factor. And at just 2.3 ounces, it won't weigh your pocket down either.
The Scallion's high-carbon stainless steel blade offers good edge retention and excellent corrosion resistance. The bead-blasted finish gives the blade a matte look and it's easy to maintain, too. The navy blue Scallion is easy to open when you need it, too, thanks to its SpeedSafe assisted opening mechanism. With SpeedSafe, you just pull back on the ambidextrous flipper or push on the thumbstud and the blade moves out of the handle, ready for use. The navy blue Scallion's handle scales are anodized aluminum over steel liners. Anodizing not only enables the aluminum to take a scratch resistant color, but it actually strengthens the aluminum.
For safety, the navy blue Scallion has a locking liner to keep it locked safely open and a Tip-Lock to keep it locked safely closed during transport. Whether you're a first-time Scallion owner or want to grow your collection, you're going to like this one.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel "liner," the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $109.99 |
The popular Scallion now in olive drab
The popular Scallion now comes in a handsome new color: olive drab. Like the rest of the Scallion family, it has 2 1/4-inch blade that makes it the ideal size for easy, lightweight pocket carry. Even so, the Scallion steps up to just about any task you'd ask it to do, from breaking down cardboard boxes to slicing an apple for a snack.
The blade is 420HC, a high-carbon stainless steel blade with good edge retention and excellent corrosion resistance. For an easy-to-maintain matte finish, the blade is bead-blasted. And as always, the Scallion comes equipped with SpeedSafe assisted opening. With SpeedSafe, you can open the blade one-handed. Just pull back on the ambidextrous blade protrusion or push on the thumbstud and the blade moves out of the handle, ready for use. To get that discrete olive drab color, we anodize the Scallion's aluminum handle scales so they will accept a dye to produce our scratch resistant, colorful handles. A locking steel liner secures the blade when open and is easy to close for storage.
A Tip-Lock builds in extra safety during transport. Just move the slider built into the handle to help guard against accidental opening. If you like a little color in your pocketknife, but want something a bit discrete, the new olive drab Scallion may be for you.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
Liner Lock
Locks the blade open during use; one side of the knife's steel "liner," the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $109.99 |
The color you've been waiting for?
Yeah. It's purple. Not only purple, but awesomely purple.
The Scallion is already one of our most popular knives, but we thought we'd step it up for 2013 by giving this Scallion some great-looking, jeweltone purple handle scales. The oh-so-handy 2 1/4-inch blade stays the same, ensuring that the purple Scallion is right-sized for lightweight and convenient carry in pocket, purse, or backpack.
The blade steel is high-carbon stainless steel that gives you good edge retention and excellent corrosion resistance. We've bead-blasted the blade to give it a soft, matte look and make it easier to maintain, too. Whether you're left-handed or right-handed, the Scallion is quick and easy to open thanks to SpeedSafe assisted opening and the Scallion's ambidextrous flipper. Just pull back on the flipper or push on the thumbstud and the blade moves out of the handle, ready for use. The Scallion's handle scales are anodized aluminum over steel liners. Anodizing enables the aluminum to take that eye-popping purple color and helps them resist scratching. Even better, anodizing actually strengthens the aluminum so you get a handle that's strong, lightweight, and colorful.
For safety, the purple Scallion has a locking liner to keep it locked safely open and a Tip-Lock to keep it locked safely closed during transport. If you've been waiting for a more colorful Scallion, the purple Scallion just may be the ticket.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel "liner," the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $109.99 |
A right-sized pocketknife in classic black
With its 2 1/4-inch blade, the Scallion is a smaller knife, just perfect for pocket carry. But just because it's smaller doesn't mean the Scallion isn't mighty. In fact, the Scallion is perfect for just about any cutting task you'd care to ask it to do - from breaking down a cardboard box to cutting twine to cutting apple slices for lunch.
This Scallion's partially serrated blade adds additional cutting versatility. And to ensure your handy little blade is always ready when you need it, the Scallion is equipped with SpeedSafe assisted opening. Just pull back on the ambidextrous blade protrusion or push on the thumbstud and the blade moves out of the handle, ready for use. The high-carbon blade steel offers good edge retention and excellent corrosion resistance. The bead-blasted finish is easy to maintain.
For safety, the Scallion has two locking systems. The locking liner locks the blade open so it can't accidentally close during use. And to ensure that it won't accidentally open during transport, the Scallion is also equipped with a Tip-Lock slider to lock the blade closed when folded. In classic black, the Scallion's textured, glass-filled nylon handle scales are durable, lightweight, and easy to maintain.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Scallop Serration
Serrations assist in cutting through particularly tough or fibrous material, such as rope or cord. The scalloped serration offers even cutting power on both push and pull strokes and doesn't “tear' the material as much as other serration styles.
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Single Position
The pocketclip is in a fixed position on the knife handle; usually it is positioned for tip-down, right-handed carry, though this may vary.
Additional Features
| List | $89.99 |
There are lots of reasons why the Leek is so popular
The Kershaw Leek just may be the ideal EDC. With its 3-inch blade, the Leek is a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks.
The blade is a modified drop-point, so it's a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work. For a partially serrated blade, choose the 1660ST Leek. Like other “Onion' knives, the Leek features the SpeedSafe ambidextrous assisted opening system.
Whether you're left-handed or right-handed, just pull back on the blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work. In addition to its 14C28N blade, this Leek features a handle of pure stainless steel that gives it a clean, sleek look. For confident blade use, a super-secure frame lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
&return&&newline&
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
&return&&newline&
Additional Features
&return&&newline&
| List | $114.99 |
Leek Framelock A/O Black
Assisted opening. 4" (10.16cm) closed. 3" (7.62cm) black Cerakote finish 14C28N Sandvik stainless blade. Black anodized aluminum handle. Extended tang. Thumb stud. Pocket clip. Lanyard hole. Clam packed.
MORE»| List | $104.99 |
A Must-Have Addition to your Leek Collection
The famous Kershaw Leek just got better—with our new BlackWash finish that gives this Leek an already-broken-in look, like your favorite pair of well worn jeans.
With its 3-inch blade, the Leek is a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks. The blade is a modified drop-point, so it's a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work. The BlackWash™ Leek features the SpeedSafe ambidextrous assisted opening system. Whether you're left-handed or right-handed, just pull back on the blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work.
For confident blade use, a super-secure frame lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications:
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers
Additional Features:
| List | $134.99 |
our patented Composite Blade Technology plus BlackWash™
The first thing you'll notice about this Leek is the Composite Blade. The wavy braze line permanently joins a razor-sharp D2 cutting edge to a Sandvik 14C28N spine. The next thing you'll notice is the new BlackWash finish. With a Composite Blade and BlackWash, this is the Leek that has it all.
On the edge is a high-carbon, high-chromium D2 steel capable of taking and holding an incredible edge. On the spine is high-performance Sandvik 14C28N. With a Composite Blade, each type of steel is allowed to do what it does best. The Composite Blade Leek shares its 3-inch blade, slim, easy-to-carry design, and versatility with other Leeks. The BlackWash finish gives the Leek the look of a favorite, well worn pair of jeans—the ones you just can't live without. Once you own it, you may just feel that way about this Composite Blade BlackWash Leek, too.
The modified drop-point blade shape makes it a good slicing knife, while the slim tip gives it excellent piercing and detail work capabilities. SpeedSafe assisted opening system makes it easy to open the knife one-handed, whether you're a lefty or a righty. A simple pull back on the ambidextrous flipper and the Leek's Composite Blade is ready to go to work.
This Leek also features a handle of pure stainless steel, BlackWashed to match the blade.. A secure frame lock keeps the blade locked open during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Composite
A blade composed of several types of steel brazed together in a permanent joint; the technology enables Kershaw to use steel known for edge holding on the edge, strength on the spine for the best of both worlds.
Additional Features
| List | $184.99 |
The famous Kershaw Leek goes upscale with a handsome new suit of carbon fiber. The carbon fiber handle also lightens this Leek's weight, making it an extremely comfortable EDC.
The razor-sharp blade of high-performance CPM 154 means it can take care of a full range of cutting tasks. The blade is a modified drop-point, so it's a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work. The blade's stonewashed finish looks good and hides use scratches. The Carbon Fiber Leek features the SpeedSafe ambidextrous assisted opening system, so whether you're left-handed or right-handed, just pull back on the flipper and the Leek's blade is ready to go to work.
A secure liner lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
All-in-all, if you love Leeks, you're going to want to add this one to your collection.
| List | $189.99 |
Everything the classic Leek has, plus a DLC coating of matte black
If you prefer your knife in basic black, this one just might be your perfect EDC. To create this matte-black look, Kershaw engineers ionize metal and deposit it on both blade and handle as a microns-thin coating. This process results in a coating known as DLC, or Diamond-Like Carbon, which is hard and scratch resistant.
With its 3-inch blade, the Leek is a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks. The blade is a modified drop-point, so it's a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work. For a partially serrated blade, choose the 1660CKTST Leek in basic black. The Leek features the SpeedSafe ambidextrous assisted opening system. Whether you're left-handed or right-handed, just pull back on the blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work.
For confident blade use, a super-secure frame lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
&return&&newline&| List | $134.99 |
Everything the classic Leek has, plus a DLC coating of matte black
If you prefer your knife in basic black, this one just might be your perfect EDC. To create this matte-black look, Kershaw engineers ionize metal and deposit it on both blade and handle as a microns-thin coating. This process results in a coating known as DLC, or Diamond-Like Carbon, which is hard and scratch resistant.
With its 3-inch blade, the Leek is a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks. The blade is a modified drop-point, so it's a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work.
For a partially serrated blade, choose the 1660CKTST Leek in basic black. The Leek features the SpeedSafe ambidextrous assisted opening system. Whether you're left-handed or right-handed, just pull back on the blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work. For confident blade use, a super-secure frame lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Scallop Serration
Serrations assist in cutting through particularly tough or fibrous material, such as rope or cord. The scalloped serration offers even cutting power on both push and pull strokes and doesn't “tear' the material as much as other serration styles.
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
| List | $134.99 |
Specifications:
The popular Leek gets a next level upgrade with CPM 154 blade steel and genuine copper handle scales. The Leek has been called the ideal EDC. With its 3-inch blade, it's a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance CPM 154 means it can take care of a world of cutting tasks. Denser than steel, this Leek's copper handle gives it some comfortable weight. Over time the handles will patina so that each copper Leek has its own unique look
MORE»| List | $174.99 |
Olive drab your color? Then here's your Leek
There are lots of very good reasons the Leek is one of the most popular Kershaws. For one thing, the slim blade is remarkably versatile. This modified drop-point blade shape gives it good slicing capabilities, while the slim tip lets it excel at piercing and detail work. The blade steel is high-performance Sandvik 14C28N stainless that sharpens to a razor edge and holds the edge for a good long time. The 3-inch blade is perfect for most day-to-day tasks.
Leek lovers also love the fast and easy opening provided by SpeedSafe assisted opening. Whether you're left-handed or right-handed, a simple pull back on the ambidextrous flipper or push outward on the thumbstud and the Leek's blade is ready to go to work.
But the newest and most obvious thing about this Leek is the new olive drab handle color. The color is eye-catching and different, but also discrete. The olive drab color is fade-resistant, scratch-resistant, and permanently bonded to the anodized aluminum—so it looks good now and looks good later, too.
For safety, a locking liner keeps the blade locked open during use and a Tip-Lock slider locks it closed when folded. The pocketclip is reversible for tip-up or tip-down carry and the handle is drilled to accept a lanyard. This slim, easy-to-carry design, with plenty of cutting versatility just may be the perfect EDC.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel "liner," the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $114.99 |
Looking for a Leek that won't get lost in the grass? Take a look at our new orange Leek.
The brilliant orange of the anodized-aluminum handle is a fade-resistant, scratch-resistant dye that's permanently bonded to the aluminum—so it looks good now, and will continue to look good later. The business end of the knife is a task-ready 3-inch blade of Sandvik 14C28N stainless steel, a steel designed in a partnership between Kershaw and Sandvik. This high-performance steel enables us to make the Leek's blade razor sharp out of the box and helps it hold that edge, too. The modified drop-point blade shape makes it a good slicing knife, while the slim tip gives it excellent piercing and detail work capabilities.
Whether you're left-handed or right-handed, it's easy to open your orange Leek with SpeedSafe assisted opening. A simple pull back on the ambidextrous flipper blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work. For safety, a locking liner keeps the blade locked open during use and a Tip-Lock slider locks it closed when folded. The pocketclip is reversible for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
The orange Leek is a slim, easy-to-carry design that gives you plenty of cutting versatility—and good looks.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel "liner," the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $114.99 |
Proudly purple
Now your EDC-perfect Leek comes in a brand new color: jewel-tone purple.
Like other Leeks, this one features a task-ready 3-inch blade, slim, easy-to-carry design, and cutting versatility. The modified drop-point blade shape makes it a good slicing knife, while the slim tip gives it excellent piercing and detail work capabilities. Built of Sandvik 14C28N high-performance stainless steel, the Leek's blade comes razor sharp out of the box and holds its edge, too. Whether you're left-handed or right-handed, it's easy to open your Leek one-handed with SpeedSafe assisted opening. A simple pull back on the ambidextrous blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work.
The handle is anodized aluminum; the same kind used in many aircraft and spacecraft applications. The purple color is a fade-resistant, scratch-resistant dye that's permanently bonded to the aluminum. Looks good now, looks good later, too. For safety, a locking liner keeps the blade locked open during use and a Tip-Lock slider locks it closed when folded. The pocketclip is reversible for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel "liner," the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $114.99 |
A reverse tanto blade shape adds a new level of functionality to the popular Leek. With its 3-inch blade, the Random Leek is a good-sized knife, but not too big. The reverse tanto blade shape adds durability and provides an ideal angle for cutting through boxes and other everyday jobs. The slim design makes it easy to carry, and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks. This Random Leek is all stainless steel with a sturdy frame lock. It opens one-handed with SpeedSafe assisted opening. MORE»
| List | $114.99 |
A new blade shape and an all-BlackWash look bring the Leek to the next level. With its 3-inch blade, the Random Leek - BlackWash is a good-sized knife, but not too big. The reverse tanto blade shape adds durability and provides an ideal angle for cutting through boxes and other everyday jobs. Our BlackWash finish gives the Random Leek an already-broken-in look, like your favorite pair of well-worn jeans. The slim design makes it easy to carry, and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks. This Random Leek is all stainless steel with a sturdy frame lock. It opens one-handed with SpeedSafe assisted opening. MORE»
| List | $134.99 |
There are lots of reasons why the Leek is so popular
The Kershaw Leek just may be the ideal EDC. With its 3-inch blade, the Leek is a good-sized knife, but not too big. The slim design makes it easy to carry and its razor-sharp blade of high-performance Sandvik 14C28N means it can take care of a full range of cutting tasks.
The blade is a modified drop-point, so it's a good slicing knife, while the slim tip gives it piercing capability and the ability to do detailed work. For a partially serrated blade, choose the 1660ST Leek. The Leek features the SpeedSafe ambidextrous assisted opening system. Whether you're left-handed or right-handed, just pull back on the blade protrusion or push outward on the thumbstud and the Leek's blade is ready to go to work.
In addition to its 14C28N blade, this Leek features a handle of pure stainless steel that gives it a clean, sleek look. For confident blade use, a super-secure frame lock keeps the blade locked during use and a Tip-Lock slider locks the blade closed when folded. The pocketclip can be configured for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Scallop Serration
Serrations assist in cutting through particularly tough or fibrous material, such as rope or cord. The scalloped serration offers even cutting power on both push and pull strokes and doesn't “tear' the material as much as other serration styles.
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
| List | $114.99 |
The Leek you've been asking for is here
Remember when you said, "I wish you guys made a plain black Leek with a stonewashed blade"?
Well, we made it.
Like other Leeks, it features a task-ready 3-inch blade, slim, easy-to-carry design, and cutting versatility. The modified drop-point blade shape makes it a good slicing knife, while the slim tip gives it excellent piercing and detail work capabilities. Built of Sandvik 14C28N high-performance stainless steel, the Leek's blade comes razor sharp out of the box and holds its edge, too. We gave it a roughened up, stonewashed finish to hide scratches and for general cool looks. Of course, it also has SpeedSafe assisted opening for fast and easy one-handed opening. Left- or right-handed, a simple pull back on the ambidextrous flipper or push outward on the thumbstud and the Leek's stonewashed blade is ready to go to work.
A sturdy liner lock keeps the blade open during use and a Tip-Lock slider locks it closed when folded. The pocketclip is reversible for tip-up or tip-down carry and the handle is drilled to accept a lanyard.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The "flipper" is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Frame Lock
A portion of the handle (the knife frame) moves behind the blade to lock it into position during use. This is a safety feature of the knife.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $114.99 |
We Heard Everyone Looks Good in Teal
Kershaw Leeks have been top sellers since they were first introduced. But because they're so popular, lots of people want a Leek they can call their own-in a color or finish they really like. So we're happy to introduce a brand new color so that you can have the Leek you've always wanted. This one is a bright teal.
Like all Leeks, this one features a blade of Sandvik 14C28N high-performance stainless steel. The task-ready 3-in., blade is a modified drop-point shape that offers good slicing capabilities, while the slim tip makes it great for piercing and detail work. The blade comes razor sharp out of the box and holds its edge well, too.
The brilliant color is applied to the anodized aluminum handle. The color is a fade-resistant, scratch-resistant dye that's permanently bonded to the aluminum, so it looks good now, and looks good later, too. But color isn't the only benefit of anodizing; the process strengthens the aluminum as well.
SpeedSafe equipped, this teal Leek is fast and easy to open left- or right-handed thanks to the ambidextrous flipper or thumbstud. For safety, a locking liner keeps the blade locked open during use and a Tip-Lock slider locks it closed when folded.
Technical Specifications
Flipper
May be used on either manual or assisted opening knives. The “flipper' is a protrusion on the back of the blade that the user can pull back on, or flip, in order to move the blade easily out of the handle.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $114.99 |
A Blur on the dark side
This is one of the original Kershaw Blurs, the Blurs that started it all.
Like all Blurs it's equipped with a big, slightly recurved blade that's ideal for multitasking. The blade shape offers both excellent slicing and piercing capabilities and the high-performance Sandvik 14C28N stainless blade steel offers corrosion resistance and hardness. The black Blur has a DLC (Diamond-Like Carbon) coated blade for extra corrosion resistance and enhanced looks. Also available with a partially serrated blade as 1670BLKST.
This black Blur has, as you might expect, black handles with Trac-Tec grip-tape handle inserts for an extremely solid grip. The handle itself is durable 6061-T6 anodized aluminum, sometimes described as “aircraft aluminum' since it is a common material used for aircraft fittings. But the main point is that it's lightweight, extremely durable, and - when anodized - accepts a dye so we can create colored handles that are scratch resistant and extra tough.
For easy one-handed opening, the Blur is equipped with SpeedSafe® assisted opening. A short push on the thumbstud overcomes the resistance built into the torsion bar in the SpeedSafe mechanism. The SpeedSafe takes over and the blade moves out of the handle quickly and easily. One-handed opening is easy with SpeedSafe. The pocketclip is reversible for your choice of tip-up or tip-down carry. There's even a pre-drilled lanyard hole.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
| List | $159.99 |
The Basic Black Blur—Plus Partial Serration
This is one of the original Kershaw Blurs, the Blurs that started it all.
Like all Blurs it's equipped with a big, slightly recurved blade that's ideal for multitasking. The blade shape offers both excellent slicing and piercing capabilities and the high-performance Sandvik 14C28N stainless blade steel offers corrosion resistance and hardness. The black Blur has a DLC (Diamond-Like Carbon) coated blade for extra corrosion resistance and enhanced looks. This Blur's partially serrated blade provides additional cutting power for making short work of rope, cord, and other fibrous materials.
As you might expect, the black Blur has black handles with Trac-Tec grip-tape handle inserts for an extremely solid grip. The handle itself is durable 6061-T6 anodized aluminum, sometimes described as “aircraft aluminum' since it is a common material used for aircraft fittings. But the main point is that it's lightweight, extremely durable, and—when anodized—accepts a dye so we can create colored handles that are scratch resistant and extra tough.
For easy one-handed opening, the Blur is equipped with SpeedSafe assisted opening. A short push on the thumbstud overcomes the resistance built into the torsion bar in the SpeedSafe mechanism. The SpeedSafe takes over and the blade moves out of the handle quickly and easily. One-handed opening is easy with SpeedSafe. The pocketclip is reversible for your choice of tip-up or tip-down carry. There's even a pre-drilled lanyard hole.
Technical Specifications:
Scallop Serration
Serrations assist in cutting through particularly tough or fibrous material, such as rope or cord. The scalloped serration offers even cutting power on both push and pull strokes and doesn't “tear' the material as much as other serration styles.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Inset Liner Lock
A strip of stainless steel is riveted inside the knife's handle—most commonly when the handle is a lightweight material. This enables us to create a slimmer, lighter knife, while still providing the strength and security of a locking liner.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features:
| List | $159.99 |
The Blur is Looking Good in BlackWash™
We've added our awesome BlackWash finish to one of our most popular knives: the black Blur.
BlackWash gives the blade an already-broken-in look-like a favorite well-worn pair of jeans. The coating provides an extra measure of protection for the metal, and the BlackWash helps hide any additional scratches you may put on the knife during normal use.
Like all Blurs, this new BlackWash version is equipped with a big, slightly recurved blade that's ideal for multitasking. The blade shape offers both excellent slicing and piercing capabilities. High-performance Sandvik 14C28N stainless steel provides the Blur's blade with corrosion resistance and excellent edge-holding ability.
The handle is built of durable 6061-T6 anodized aluminum, which is sometimes described as “aircraft aluminum' since it is a common material used for aircraft fittings. It's lightweight, extremely durable, and accepts a dye well so Kershaw can create colored handles that are scratch resistant and extra tough. Trac-Tec grip-tape inserts provide an extra-secure grip.
For easy one-handed opening, the Blur is equipped with SpeedSafe assisted opening. The pocketclip is reversible for a choice of tip-up or tip-down carry.
Technical Specifications
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Inset Liner Lock
A strip of stainless steel is riveted inside the knife's handle-most commonly when the handle is a lightweight material. This enables us to create a slimmer, lighter knife, while still providing the strength and security of a locking liner.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features
| List | $159.99 |
A carbide glassbreaker and partially serrated edge make this a must-have emergency tool
The Blur has been a Kershaw favorite for many years. It's the ideal knife for tough use, whether on the job or around the garage.
The recurve blade is built for multitasking with excellent slicing and piercing capabilities, and the aircraft aluminum handles are tough and lightweight. This Blur also has a carbide tip built into those durable handles. And that's important because a plain steel tip won't have the same effect in an emergency. If you need to break out a windshield in order to pull a victim to freedom, it's got to be carbide. In the Blur Glassbreaker, it is.
The Blur's blade makes it an even more effective rescue tool. Built of high-performance Sandvik 14C28N, the partially serrated blade cuts through seatbelt webbing (or other tough materials) with ease, which can make all the difference at a crucial moment.
The Blur Glassbreaker is designed to give you a secure grip, too, even in non-optimal environmental conditions. The handle features Trac-Tec grip tape inserts that provide extra traction to help keep the knife where it belongs - in your hand. The Blur Glassbreaker is equipped with SpeedSafe® assisted opening so you can easily open the knife one-handed. Which is also important - because you're not always going to have both hands free in an emergency.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Scallop Serration
Serrations assist in cutting through particularly tough or fibrous material, such as rope or cord. The scalloped serration offers even cutting power on both push and pull strokes and doesn't “tear' the material as much as other serration styles.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Additional Features
| List | $184.99 |
The Blur looks extra-good in blue
Like all Blurs, the 1670NBSW is equipped with a big, slightly recurved blade that's ideal for multitasking. The blade shape offers both excellent slicing and piercing capabilities. High-performance Sandvik 14C28N stainless steel provides the Blur's blade with corrosion resistance and excellent edge-holding ability. The stonewashed blade finish gives the surface a desirable roughened or scuffed look that helps hide scratches and fingerprints.
The handle is built of durable 6061-T6 anodized aluminum, which is sometimes described as “aircraft aluminum' since it is a common material used for aircraft fittings. It's lightweight, extremely durable, and anodizes well so Kershaw can create colored handles that are scratch resistant and extra tough. Trac-Tec grip-tape inserts provide an extra-secure grip. The Blur's inset liner lock ensures secure blade lock up during use.
For easy one-handed opening, the Blur is equipped with SpeedSafe® assisted opening. Just push on the built-in thumbstud. The reversible pocketclip lets you carry tip-up or tip-down comfortably.
Technical Specifications
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
Additional Features:
| List | $159.99 |
The popular Blur -- now in Olive Drab
If you don't yet own a Kershaw Blur, it's probably because you've just never had your hands on one. Because once you do, you'll see why the Blur has remained one of our most popular knives for so many years. It starts with the big, slightly recurved blade. The shape is ideal for multitasking and offers both excellent slicing and piercing capabilities.
The olive drab Blur's 14C28N high-performance stainless-steel blade is DLC (Diamond-Like Carbon) coated for additional wear and corrosion resistance. DLC is hard, non-reflective, and just plain looks good.
In this Blur, the black DLC coating is matched with black Trac-Tec grip-tape handle inserts for an extremely solid grip. The handle itself is durable 6061-T6 anodized aluminum, sometimes described as “aircraft aluminum' since it is a common material used for aircraft fittings. But the main point is that it's lightweight, extremely durable, and - when anodized - accepts a dye so we can create colored handles that are scratch resistant and extra tough. For easy one-handed opening, the Blur is equipped with SpeedSafe® assisted opening. The pocketclip is reversible for your choice of tip-up or tip-down carry. There's even a pre-drilled lanyard hole.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
| List | $159.99 |
A premium Blur with S30V blade steel
Take a step up in the world of Kershaw Blurs with the S30V Blur.
The star attraction is a blade of S30V powdered stainless steel. Powdered steel is more dense and fine-grained, enabling it to take and hold an extremely fine edge for a longer period of time. It was specifically designed by Crucible as a blade steel and exhibits excellent toughness, wear resistance and hardness. Like all Blurs, the S30V Blur has a slightly recurved blade that's ideal for multitasking, providing top slicing and piercing capabilities. The S30V Blur has a stonewashed finish for a roughed-up, non-reflective look.
The premium blade is paired with an anodized aircraft aluminum handle that's machined to accept Trac-Tec grip-tape inserts. Together, they provide a solid grip in just about any environmental conditions. The anodizing process not only enables the aluminum to accept a dye so we can produce color handles, but it actually strengthens the aluminum, making this one tough knife. Both handle and Trac-Tec are in basic black for basic good looks.
The S30V Blur is equipped with SpeedSafe® assisted opening for fast and easy one-handed opening. The pocketclip is reversible for your choice of tip-up or tip-down carry. Handle is drilled to accept a lanyard.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
| List | $179.99 |
Take on the tough tasks with this tactically styled Blur
The Tanto Blur offers all the great grip advantages of the other Blurs on the force, but this one offers tactical styling with a modified tanto blade with partial serration.
With its angled shape, the tanto blade provides additional piercing power to penetrate tough materials. The unique shape puts more steel behind the point to support its piercing tasks. We've also found that the short front edge is particularly handy for opening boxes. For razor sharpness, Kershaw hollow grinds the edge. Then for additional versatility, Kershaw added partial serration to the blade, giving you a great tool for cutting through materials such as webbing or rope.
All this makes the Tanto Blur a good choice for situations in which you're going to need to make an impact on your environment. In an emergency, could be a real lifesaver. The Tanto Blur's blade is built of high-performance Sandvik 14C28N stainless blade steel for corrosion resistance and hardness. The black DLC (Diamond-Like Carbon) coating provides additional extra corrosion resistance and is non-reflective. Black anodized aluminum handles of durable 6061-T6 aircraft aluminum with sure-grip Trac-Tec inserts complete the Tanto Blur's discrete, matte look.
Technical Specifications
Made In The USA
When you see this on one of our knives, it means the knife was made in our Tualatin, Oregon manufacturing facility by skilled Kershaw knifemakers.
2-Step Serration
Serrations assist in cutting through particularly tough or fibrous material, such as rope or cord. The Kershaw 2-step serration is a more aggressive style of serration.
SpeedSafe®
Assists you to open any SpeedSafe® knife quickly and easily with a manual push on the thumbstud or pull back on the flipper; built into many Kershaw best sellers.
Liner Lock
Locks the blade open during use; one side of the knife's steel “liner,' the steel plate to which the handle scales are attached, moves into position behind the blade to securely lock it open.
Reversible
Pre-drilled holes in the handle enable the user to change either the tip position or the side on which the knife carries.
Additional Features
| List | $159.99 |
Specifications:
The Dividend is more striking than ever with its new Composite Blade and machined and anodized aluminum handle. Kershaw's proprietary Composite Blade Technology joins two steels in one blade. In this case, CPM D2 and Bohler N690. We put the Bohler N690 on the blade upper to take advantage of its corrosion resistance and exceptional hardness. We put the D2 on the cutting edge to take advantage of its wear resistance, toughness, and excellent edge retention. Then we permanently joined them in a “toothlike' pattern for warbird-like style.
MORE»| List | $214.99 |