Ohio Knife and Tool Specials

Model: BS109PL

The Bear & Son 109 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 1-1/2″ Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 109 has a hollow nail nick present to open the blade. The Bear & Son 109 has an overall length of 4-1/8″ and is a good size to fit in the pocket, purse or on a key chain. The 109 weighs 1.0 ounces. MORE»

Model: BS61511

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Stainless Steel w/Black Soft Touch Coating
• Open Length : 7-3/8"
• Closed Length : 4-1/4"
• Blade Length : 3-1/4"
• Weight : 3.8 oz.
• Carry Direction: Tip-Down
• Origin: Import
• Extras : Frame Lock, Black Finish Blade, Metal Pocket Clip & Taper Ground Blade

Model: BS61527

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Stainless Steel
• Open Length : 7-1/4"
• Closed Length : 4"
• Blade Length : 3-1/4"
• Weight : 1.2 oz.
• Extras : Folding C-Clamp

4 in. Minimal Frame Lock

Model: BS705CO

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zytel Registered Trademark
• Closed Length : 3-3/4"
• Blade Length : 2-3/4"
• Weight : 1.3 oz.
• Extras : Nickel Silver Bolsters, Hollow Ground Blade, Positive Lock & Mossy Oak Break-Up Country Camo

Model: BS219R

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Rosewood
• Open Length : 4-7/8"
• Closed Length : 2-7/8"
• Blade Length : 2"
• Weight : 1.0 oz.
• Extras : Nickel Silver Bolsters & Hollow Ground Blade

Model: BS110BK

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Aluminum
• Open Length: 6-1/2"
• Closed Length: 3-7/8"
• Blade Length: 2-3/8"
• Weight: 1.9 oz.

3-7/8 in. ALUMINUM SLIP JOINT W/CLIP BLACK

The Bear & Son 110 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 2-3/8" Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 110 has a hollow nail nick present to open the blade. The Bear & Son 110 has an overall length of 6-1/2" and is a good size to fit in the pocket and features a short pocket clip. The 110 weighs 1.9 ounces and is proudly made in the USA.

Model: BS110YW

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Aluminum
• Open Length: 6-1/2"
• Closed Length: 3-7/8"
• Blade Length: 2-3/8"
• Weight: 1.9 oz.

3-7/8 in. ALUMINUM SLIP JOINT W/CLIP YELLOW

The Bear & Son 110 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 2-3/8" Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 110 has a hollow nail nick present to open the blade. The Bear & Son 110 has an overall length of 6-1/2" and is a good size to fit in the pocket and features a short pocket clip. The 110 weighs 1.9 ounces and is proudly made in the USA.

Model: BS110PL

The Bear & Son 110 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 2-3/8″ Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 110 has a hollow nail nick present to open the blade. The Bear & Son 110 has an overall length of 6-1/2″ and is a good size to fit in the pocket and features a short pocket clip. The 110 weighs 1.9 ounces. MORE»

Model: BS61514

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Stainless Steel (Camo)
• Open Length : 8-5/8"
• Closed Length : 5"
• Blade Length : 3-1/4"
• Weight : 5.2 oz.
• Extras : Pocket Clip, Frame Lock
• Origin: Import

5 in. Brisk™ 1.0 Large Frame Lock

The Bear Edge® Pattern 514 is an imported BRISK™ 1.0 Large 5' Stainless Steel Frame Lock. The Modified Drop Point 3-5/8' Blade is made from 440 Stainless Steel with a Black Epoxy Powder Coat Finish to prevent rusting. Dual Thumb Studs allow for a smooth and quick opening of the Bear Edge® Logo engraved blade. The Bear Edge® Pattern 514 features a Frame Lock that ensures the blade will remain firmly in place once opened and is easy to close. Jimping is present on the top of the blade for a more secure grip. The Stainless Steel with Camo Handle features a Bear Edge® engraved Pocket/Boot Clip for Tip-Up Carry and quick access. A lanyard hole is present on the back of the handle for secure fastening and storage. The Bear Edge® Pattern 514 has an overall length of 8-5/8" and weighs 5.2 ounces.

Model: BS61507

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Stainless Steel (Camo)
• Open Length : 7-3/8"
• Closed Length : 4-1/4"
• Blade Length : 3-1/4"
• Weight : 3.8 oz.
• Extras : Frame Lock, Pocket Clip
• Origin: Import

4-1/4 in. Brisk Medium Frame Lock

The Bear Edge® Pattern 507 is an imported BRISK™ 1.0 Medium 4-1/4' Stainless Steel Frame Lock. The Modified Drop Point 3-1/4' Blade is made from 440 Stainless Steel with a Black Epoxy Powder Coat Finish to prevent rusting. Dual Thumb Studs allow for a smooth and quick opening of the Bear Edge® Logo engraved blade. The Bear Edge® Pattern 507 features a Frame Lock that ensures the blade will remain firmly in place once opened and is easy to close. Jimping is present on the top of the blade for a more secure grip. The Stainless Steel with Camo Handle features a Bear Edge® engraved Pocket/Boot Clip for Tip-Up Carry and quick access. A lanyard hole is present on the back of the handle for secure fastening and storage. The Bear Edge® Pattern 507 has an overall length of 7-3/8" and weighs 3.8 ounces.

Model: BS240R

Bear & Son Cutlery’s 2 1/2″ Rosewood Mini Executive knife is as good looking as it is small. Smaller than most of the fingers on your hand, this knife is the ultimate minimalist, lightweight, never know it’s there every day carry knife that still holds true to the classic styling of a rosewood handle and high quality stainless steel blade. An EDC knife for anyone who likes to keep it minimal, lightweight or classic. MORE»

Model: BS61105

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material: Bead Finish Aluminum Handles
• Open Length : 7-3/8"
• Closed Length : 4-1/4"
• Blade Length : 3-1/4"
• Weight : 3.7 oz.
• Carry Direction: Tip-Up
• Origin: Built in America
• Extras : Ball Bearing Washers, Sideliner Lock, Metal Carry Pocket Clip, Bear Edge Logo on Clip, Reversible Pocket Clip & Taper Ground Blade

Model: BS232R

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Rosewood
• Open Length : 4-7/8"
• Closed Length : 2-7/8"
• Blade Length : 2-1/8"
• Weight : 1.0 oz.
• Extras : Nickel Silver Bolsters & Hollow Ground Blade

Model: BS61503

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Black G10
• Open Length : 7-7/8"
• Closed Length : 4-1/2"
• Blade Length : 3-1/2"
• Weight : 4.7 oz.
• Origin: Import
• Extras : Assisted Opening, Sideliner Lock, Black Finish Blade, Reversible Pocket Clip & Taper Ground Blade

Model: BS61502

4-1/2 in. Black G10 Assisted Drop Point Sideliner MORE»

Model: BS224R

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Rosewood
• Open Length : 5-1/4"
• Closed Length : 3"
• Blade Length : 2-1/8"
• Weight : 1.5 oz.
• Extras : Nickel Silver Bolsters, Hollow Ground Blade & Positive Lock

Model: BS113

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Epoxy Powder Coat)
• Blade Length : 3"
• Overall Length : 7-1/2"
• Closed Length : 4"
• Weight : 3.8 oz.
• Extras : Hollow Ground Blade

Model: BS113B

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Black Epoxy Powder Coat)
• Blade Length : 3"
• Overall Length : 7-1/2"
• Closed Length : 4"
• Weight : 3.8 oz.
• Extras : Hollow Ground Blade

Model: BS113BTR

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Black Epoxy Powder Coat)
• Blade Length : 3"
• Overall Length : 7-1/2"
• Closed Length : 4"
• Weight : 3.8 oz.
• Extras : No Sharp Edge

Model: BS113TR

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Epoxy Powder Coat)
• Blade Length : 3"
• Overall Length : 7-1/2"
• Closed Length : 4"
• Weight : 3.8 oz.
• Extras : No Sharp Edge

Model: BS61522

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Aluminum (Camo)
• Overall Length : 9-3/4"
• Blade Length : 4-7/8"
• Weight : 9.2 oz.
• Extras : Sideliner Lock, Pocket Clip
• Origin: Import

4-1/2 in. Double Blade Guthook

Model: BS226R

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Rosewood
• Open Length : 5-3/8"
• Closed Length : 3"
• Blade Length : 2-1/4"
• Weight : 1.8 oz.
• Extras : Nickel Silver Bolsters, Hollow Ground Blade & Positive Lock

Model: BS61122

Features:

Model: BS61127

The Bear Edge Pattern 127 is an American built 4-1/2” Black Assisted Sideliner. The reverse tanto 3-1/2” blade is made from 440 stainless steel with a black powder coating finish. The spring action and ball bearing washers allow the blade to open rapidly with a simple push down on the trigger. The 4-1/2” black handle has a sleek style and fits firmly in the hand allowing for a comfortable grip. Pattern 127 has a stainless-steel sideliner lock to ensure that the blade remains firmly in place and is easy to close. A boot/pocket clip is also present that allows for a tip-up carry and quick access. A lanyard spacer is present on the back of the handle that is for secure fastening and storage. The open length for Pattern 127 is 8” and weighs 4.5 ounces. MORE»

Model: BS2193R

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Rosewood
• Open Length: 8-3/4"
• Closed Length: 5"
• Blade Length: 3-7/8"
• Weight: 6.0 oz.
• Extras: Nickel Silver Bolsters

5 in. Rosewood Lg. Toothpick

The Bear & Son 2193R is a Large Toothpick with a Rosewood Handle. The Taper Ground 3-7/8" Clip Point Blade is made from High Carbon Stainless Steel, making 2193R rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 5" Rosewood Handle is designed with a Brass Liner and Nickel Silver Bolsters. The Bear & Son 2193R has the traditional slip-joint lock that is easy to open and close and a nail nick is present to open the blade. The Bear & Son 2193R has an overall length of 8-3/4" and is a beautifully designed knife. 2193R weighs 6.0 ounces and is proudly made in the USA.

Model: BS2248R

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Rosewood
• Open Length: 6-7/8"
• Closed Length: 3-7/8"
• Master Blade Length: 3-1/8"
• Spey Blade Length: 3-1/8"
• Weight: 3.0 oz.
• Extras: Nickel Silver Bolsters

3-7/8 in. Rosewood Slimline Trapper

The Bear & Son 2248R is a Slimline Trapper with a Rosewood Handle. The Taper Ground 3-1/8" Master blade and 3-1/8" Spey Blade are made from High Carbon Stainless Steel, making them rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3-7/8" Rosewood Handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son 2248R has the traditional slip-joint lock that is easy to open and close and nail nicks are present to open the blades. The Bear & Son 2248R has an overall length of 6-7/8" and is a great for trappers after small game. 2248R weighs 3.0 ounces and is proudly made in the USA.

Model: BSC207

Features:

• Blade Material : 1095 Carbon Steel
• Handle Material : Walnut
• Closed Length : 3-1/2"
• Blade Length : 2-3/4"
• Weight : 2.2 oz.
• Extras : Nickel Silver Bolsters, Brass Liners & Hollow Ground Blades

3 1/2 in. Heritage Walnut Mini Trapper

Model: BS247R

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Rosewood
• Open Length: 6-1/2"
• Closed Length: 3-7/8"
• Master Blade Length: 3"
• Spey Blade Length: 2-1/16"
• Sheepsfoot Blade: 2-1/8"
• Weight: 2.5 oz.
• Extras: Nickel Silver Bolsters

3-7/8 in. Rosewood Large Stockman

The Bear & Son 247R is a Large Stockman with a Rosewood Handle. The Hollow Ground 3" Master Blade, Taper Ground 2-1/16" Spey Blade and 2-1/8" Sheepsfoot Blade are made from High Carbon Stainless Steel, making them rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3-7/8" Rosewood Handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son 247R has the traditional slip-joint lock that is easy to open and close and nail nicks are present to open the blades. The Bear & Son 247R has an overall length of 6-1/2" and is perfect for those out on the ranch. 247R weighs 2.5 ounces and is proudly made in the USA.

Model: BS254R

Features:

• Blade Material: 440 Stainless Steel
• Handle Material: Rosewood
• Open Length: 7-3/8"
• Closed Length: 4-1/8"
• Master Blade Length: 3-1/8"
• Spey Blade Length: 3-1/4"
• Weight: 3.6 oz.
• Extras: Nickel Silver Bolster

4-1/8 in. Rosewood Trapper

The Bear & Son 254 is a Large Trapper with a Rosewood Handle. The Hollow Ground 3-1/8" Master Blade and 3-1/4" Spey Blade are made from High Carbon Stainless Steel, making them rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 4-1/8" Rosewood handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son 254 has the traditional slip-joint lock that is easy to open and close and nail nicks are present to open the blades. The Bear & Son 254 has an overall length of 7-3/8" and is perfect for those who like to trap small game. 254 weighs 3.6 ounces and is proudly made in the USA.

Model: BSCRSB193-1/2

Features:

• Blade Material : 1095 Carbon Steel
• Handle Material : Red Stag Bone
• Closed Length : 3"
• Blade Length : 2-3/8"
• Weight : 1.9 oz.
• Extras : Nickel Silver Bolsters, Brass Liners & Hollow Ground Blades

3 in. Red Stag Bone Little Toothpick

Model: BS61124B

Features:

Model: BS114

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Epoxy Powder Coat)
• Blade Length : 3-5/8"
• Overall Length : 9-1/4"
• Closed Length : 5"
• Weight : 5 oz.
• Extras : Hollow Ground Blade

Model: BS114B

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Black Epoxy Powder Coat)
• Blade Length : 3-5/8"
• Overall Length : 9-1/4"
• Closed Length : 5"
• Weight : 5.0 oz.
• Extras : Hollow Ground Blade

Model: BS114BTR

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Black Epoxy Powder Coat)
• Blade Length : 3-5/8"
• Overall Length : 9-1/4"
• Closed Length : 5"
• Weight : 5.0 oz.
• Extras : No Sharp Edge

Model: BS114PK

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Zinc (Epoxy Powder Coat)
• Blade Length : 3-5/8"
• Overall Length : 9-1/4"
• Closed Length : 5"
• Weight : 5 oz.
• Extras : Hollow Ground Blade

Model: BS263R

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Aluminum
• Open Length: 6-1/2"
• Closed Length: 3-7/8"
• Blade Length: 2-3/8"
• Weight: 1.9 oz.

6 3/8 in. ROSEWOOD SMALL HUNTER W/LEATHER SHEATH

The new Bear & Son Cutlery 263R Small Rosewood Hunter is an American-made knife built for hunters and trailblazers. The 2-7/8-inch 440 stainless steel blade holds its edge, is easy to sharpen, and resists rust. The clip-point blade allows users to cleanly cut hard-to-reach places and serves as a general-purpose cutting tool. The Rosewood handle provides a traditional look, yet offers confident control with or without gloves. A nickel silver finger guard provides additional control for toughest jobs. A handmade leather sheath is included with the 263R Small Rosewood Hunter, and the knife comes with a Quality Leather Sheath.

Model: BS61102

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Green G10
• Open Length : 7-7/8"
• Closed Length : 4-1/2"
• Blade Length : 3-3/8"
• Weight : 3.1 oz.
• Origin: Built in America
• Extras : Ball Bearing Washers, Sideliner Lock, Metal Tip-Up Carry Pocket Clip, Bear Edge Logo on Clip, Reversible Pocket Clip & Taper Ground Blade

Model: BS2009R

Features:

• Blade Material: 440 Stainless Steel
• Handle Material: Rosewood
• Open Length: 6-3/4"
• Blade Length: 2-1/2"
• Weight: 2.4 oz.
• Extras: Nickel Silver Bolsters & Quality Leather Sheath

6-3/4 in. Rosewood Caper w/Leather Sheath

Model 2009R is a 2.4 ounce Caper designed with a Hollow Ground 2-1/2' 440 High Carbon Stainless Steel blade that is rust resistant, easy to sharpen, and holds an edge very well. The stainless-steel full tang handle is made from our popular Rosewood material with a nickel silver bolster. The curve of the handle and the jimping on the top of the blade allows for a secure grip making this knife perfect for bird hunting and other small game. This fixed blade everyday carry knife also features a brown leather sheath for belt carry. Model 2009R is proudly made in the USA.

Model: BS61102B

Features:

• Blade Material : High Definition Damascus Steel
• Handle Material : Genuine India Stag BoneTrademark
• Rockwell : 58-60
• Closed Length : 5"
• Blade Length : 3-3/4"
• Weight : 5.5 oz.
• Extras : Nickel Silver Bolsters
• Includes : Leather Sheath

5 in. Genuine India Stag Bone™ Pro Lockback w/Leather Sheath

Model: BS61123

Features:

Model: BS61125

The Bear Edge Pattern 125 is an American built 4-1/4” silver Stainless Steel Assisted Sideliner. The hollow ground 3-1/2” blade is made from 440 stainless steel with a bead finish. The spring action and ball bearing washers allow the blade to open rapidly with a simple push up on the flipper. The 4-1/4” silver handle has a more sleek style but fits firmly in the hand allowing for a secure grip. Pattern 125 has a stainless-steel framelock to ensure that the blade remains firmly in place and is easy to close. A boot/pocket clip is also present that allows for a tip-up carry and quick access. A lanyard spacer is present on the back of the handle that is for secure fastening and storage. The open length for Pattern 125 is 7-1/2” and weighs 4.5 ounces. MORE»

Model: BSCC-400-B

Specifications:

• Blade Material : 1095 Carbon Steel (Black Epoxy Powder Coating)
• Handle Material : Black Epoxy Powder Coating
• Rockwell : 58-60
• Overall : 6-1/4"
• Edge : 2-7/8"
• Weight : 2.0 oz

Model: BS115W

Specifications:

• Blade Material : 1095 Carbon Steel
• Handle Material : Stainless Steel
• Open Length : 8-7/8"
• Closed Length : 5"
• Blade Length : 3-3/8"
• Weight : 5.0 oz.
• Extras : Black Powder Coated Blade
• This Item Cannot be Sold in CA or NY

Model: BS115TR

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Aluminum
• Open Length: 6-1/2"
• Closed Length: 3-7/8"
• Blade Length: 2-3/8"
• Weight: 1.9 oz.

5 in. SILVER BUTTERFLY POWDER COATED TRAINER

The Bear & Son 110 is a Lightweight Slip Joint Drop Point with an Aluminum Handle. The Taper Ground 2-3/8" Drop Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The Bear & Son 110 has a hollow nail nick present to open the blade. The Bear & Son 110 has an overall length of 6-1/2" and is a good size to fit in the pocket and features a short pocket clip. The 110 weighs 1.9 ounces and is proudly made in the USA.

Model: BS563

Features:

• Blade Material : High Carbon Stainless Steel
• Handle Material : Aluminum
• Open Length: 6-1/2"
• Closed Length : 3-7/8"
• Blade Length : 2-3/8"
• Weight : 1.9 oz.

6 3/4 in. SMALL GENUINE INDIA STAG BONE HUNTER W/LEATHER SHEATH

The new Bear & Son Cutlery 563 Small Stag Bone Hunter is an American-made knife built for hunters and trailblazers. The 2-7/8-inch 440 stainless steel blade holds its edge, is easy to sharpen, and resists rust. The clip-point blade allows users to cleanly cut hard-to-reach places and serves as a general-purpose cutting tool. The genuine India Stag Bone handle provides a traditional look, yet offers confident control with or without gloves. A nickel silver finger guard provides additional control for toughest jobs. A handmade leather sheath is included with the 563 Small Stag Bone Hunter, and the knife comes with a Quality Leather Sheath.

Model: BS505

Features:

• Blade Material : High Carbon Stainless Steel
• Handle Material : Genuine India Stag Bone™
• Open Length : 7-1/2"
• Closed Length : 3-3/4"
• Blade Length : 2-3/4"
• Weight : 2.5 oz.
• Extras : Nickel Silver Bolsters & Positive Lock

3-3/4 in. Genuine India Stag Bone™ Lockback

The Bear & Son 505 is a Clip Point Lockback with a Genuine India Stag Bone™ Handle. The Hollow Ground 2-3/4" Clip Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3-3/4" Genuine India Stag Bone™ Handle is designed with a Stainless Steel Liner and Nickel Silver Bolsters. The Bear & Son 505 has a positive lock to ensure that the blade remains firmly in place and a nail nick is present to open the blade. The Bear & Son 505 has an overall length of 7-1/2" and is a good size to fit in the pocket. 505 weighs 2.5 ounces and is proudly made in the USA.

Model: BSWSB54

Features:

• Blade Material : High Carbon Stainless Steel
• Handle Material : White Smooth Bone
• Open Length : 6-1/2"
• Closed Length : 3-7/8"
• Master Blade Length : 3"
• Spey Blade Length: 2-1/16"
• Sheepsfoot Blade Length: 2-1/8"
• Weight : 2.5 oz.
• Extras : Nickel Silver Bolsters

3-7/8 in. White Smooth Bone Large Stockman

The Bear & Son WSB47 is a Large Stockman with a White Smooth Bone Handle. The Hollow Ground 3" Master Blade, Taper Ground 2-1/16" Spey Blade and 2-1/8" Sheepsfoot Blade are made from High Carbon Stainless Steel making them rust resistant, easy to sharpen, and holds an edge exceptionally well. The 3-7/8" White Smooth Bone Handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son WSB47 has the traditional slip-joint lock that is easy to open and close and nail nicks are present to open the blades. The Bear & Son WSB47 has an overall length of 6-1/2" and is perfect for those out on the ranch. WSB47 weighs 2.5 ounces and is proudly made in the USA.

Model: BS114AB

Specifications:

• Blade Material : 440 Stainless Steel (Black TI Coat)
• Handle Material : Zinc (Black Epoxy Powder Coat)
• Blade Length : 3-3/8"
• Overall Length : 8-7/8"
• Closed Length : 5"
• Weight : 5.7 oz.
• Extras : Hollow Ground/Armor Piercing Blade

Model: BS297R

Features:

• Blade Material: High Carbon Stainless Steel
• Handle Material: Rosewood
• Open Length: 8-3/4"
• Closed Length: 5"
• Blade Length: 3-3/4"
• Weight: 5.5 oz.
• Extras: Nickel Silver Bolsters, Positive Lock, & Leather Sheath

5 in. Rosewood Professional Lockback w/Leather Sheath

The Bear & Son 297R is a Professional Lockback with a Rosewood Handle that also comes with a Leather Belt Sheath. The Bear & Son 297R has a Hollow Ground 3-3/4" Clip Point Blade that is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 5" Rosewood Handle is designed with a Stainless Steel Liner and Nickel Silver Bolsters. The Bear & Son 297R features a positive lock to ensure that the blade remains firmly in place and a nail nick is present to open the blade. The Bear & Son 297R has an overall length of 8-3/4" and comes with a leather sheath for belt carry. 297R weighs 5.5 ounces and is proudly made in the USA.

Model: BSA-300-AIBK-S

Specifications:

• Blade opens with a firm push of the recess button
• Safety to prevent accidental deployment
• Black aircraft aluminum handles
• Sandvik 14C28N stainless steel blade
• Pocket clip provides for tip-up carry and quick access
• Proudly made in Alabama, USA
• Specifications
• Blade Length: 3.25"
• Closed Length: 4.5"
• Blade Material: Sandvik 14C28N Stainless Steel
• Blade Style: Spear Point
• Blade Finish: saten
• Handle Material: Aluminum
• Locking Mechanism: Push Button
• Pocket Clip: Tip-Up, Right Carry
• Weight: 4.3 oz.
• Made in the USA

Model: BSSS15

Specifications:

• Blade Length: 3.375"
• Closed Length: 5.0"
• Overall Length: 8.875"
• Blade Material: 1095 Carbon Steel
• Blade Style: Drop Point
• Blade Grind: Hollow
• Blade Finish: Black Powder Coat
• Handle Material: Stainless Steel
• Locking Mechanism: Latch
• Pocket Clip: None
• Weight: 5.0 oz.
• Made in the USA

Model: BSAB40

Features:

• Blade Material : High Carbon Stainless Steel
• Handle Material : Abalone
• Closed Length : 2-1/4"
• Open Length: 3-7/8"
• Blade Length : 1-5/8"
• Weight : 0.9 oz.
• Extras : Nickel Silver Bolsters

2-1/2 in. Genuine Abalone Mini Executive Lockback

The Bear & Son AB40 is an Executive Lockback with an Abalone Handle. The Taper Ground 1-5/8" Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 2-1/4" Abalone handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son AB40 has the traditional slip-joint lock that is easy to open and close and a nail nick is present to open the blade. The Bear & Son AB40 has an overall length of 3-7/8" and is small enough to go unnoticed in a pocket. AB40 weighs 0.9 ounces and is proudly made in the USA.

Model: BSMC-500-ALBK-B

Features:

Model: BSMC-510-ALBK-B

Features:

Model: BS5009

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Genuine India Stag Bone
• Overall Length : 6-3/4"
• Blade Length : 2-1/2"
• Weight : 2.4 oz.
• Extras : Nickel Silver Bolsters & Quality Leather Sheath

6-3/4 in. Genuine India Stag Bone™ Caper w/Leather Sheath

Model 5009 is a 2.4 ounce Caper designed with a Hollow Ground 2-1/2' 440 High Carbon Stainless Steel blade that is rust resistant, easy to sharpen, and holds an edge very well. The stainless-steel full tang handle is made from Genuine India Stag Bone™ with a nickel silver bolster. The curve of the handle and the jimping on the top of the blade allows for a secure grip making this knife perfect for bird hunting and other small game. This fixed blade everyday carry knife also features a brown leather sheath for belt carry. Model 5009 is proudly made in the USA.

Model: BSSS14

Specifications:

• Blade Material : 440 Stainless Steel
• Handle Material : Stainless Steel
• Open Length : 9-1/4"
• Closed Length : 5"
• Blade Length : 3-5/8"
• Weight : 5.0 oz.
• Extras : Bead Finish Blade
• This Item Cannot be Sold in CA or NY

Model: BSWSB193D-1/2

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Rosewood
• Open Length : 6-5/8"
• Closed Length : 3-7/8"
• Blade Length : 2-3/4"
• Weight : 1.7 oz.
• Extras : Nickel Silver Bolsters, Positive Lock & Taper Ground Blade

3 in. White Smooth Bone Little Toothpick Damascus

Model: BS577

Features:

• Blade Material : 440 Stainless Steel
• Handle Material : Genuine India Stag BoneTrademark
• Overall Length : 9-1/4"
• Blade Length : 4-3/8"
• Weight : 6.0 oz.
• Extras : Hollow Ground Blade & Nickel Silver Bolsters
• Includes : Leather Sheath

9-1/4 in. Genuine India Stag Bone™ Fingergroove Skinner

Model: BS115D

Specifications:

• Blade Length: 3.375"
• Closed Length: 5"
• Overall Length: 8.875"
• Blade Material: Damascus Steel
• Blade Thickness: 0.10"
• Blade Style: Drop Point
• Blade Finish: Acid Etch
• Handle Material: Black Zinc (Silver Vein Epoxy)
• Locking Mechanism: Latch
• Weight: 4.7 oz.
• Made in the USA

Model: BSAB26

Features:

• Blade Material : High Carbon Stainless Steel
• Handle Material : Abalone
• Closed Length : 3"
• Open Length: 5-3/8"
• Blade Length : 2-1/4"
• Weight : 1.8 oz.
• Extras : Nickel Silver Bolsters

3 in. Genuine Abalone Executive Lockback

The Bear & Son AB26 is a Clip Point Lockback with an Abalone Handle. The Hollow Ground 2-1/4" Clip Point Blade is made from High Carbon Stainless Steel, making it rust resistant, easy to sharpen, and will hold an edge exceptionally well. The 3" Abalone Handle is designed with Stainless Steel Liners and Nickel Silver Bolsters. The Bear & Son AB26 has the traditional slip-joint lock that is easy to open and close and a nail nick is present to open the blade. The Bear & Son AB26 has an overall length of 5-3/8" and is a good size to fit in the pocket. AB26 weighs 1.8 ounces and is proudly made in the USA.